MQ150 Feed Units – 5.9 Inch (150mm) Mechanical Quill Ballscrew Feed Unit
OVERVIEW
- MQ150 Feed Units applications: Drilling, Reaming, Counterboring, Spot-facing, Hollow Milling, Recessing, Deep Hole Drilling, Chamfering and tapping
- Capabilities: Dual Feed, Back Feed, Forward and Back Feed, Peck Feed, Jump Gap Cycle are all applications to show the flexibility of this unit
- Servo Motor can be controlled by programmable controller or microprocessor
- Ballscrew centerline thrust design provides stability through unit stroke
- Mechanical drive provides consistent, effective feed rates for maximum production
- In line, Positive stop provides accurate depth control without deflection of the quill
- Optional coolant package and flanged Spindle nose for “Quick Change” chuck type tool holders
- Cast Iron Construction
https://www.youtube.com/watch?v=m5J3tXcqWBs for demonstration of MQ150 Feed Units
http://www.zagar.com for the Zagar Home Page
Specifications
- Precision ground, pre-loaded, ball screw actuated quill feed on center line of spindle
- .0001″ Per revolution minimum feed rate, 500 IPM maximum
- 1,000 Pound thrust capacity
- 3 HP Max. spindle motor size
- 150mm (5.9″) stroke
- 10,000 RPM Maximum speed
- Rapid Traverse Rate: 315 IPM
- Feed Rates: .5″ to 200 IPM
- Depth Control: Positive Stop
- Quill Diameter: 4250 Inches
- Spindle Noses: 1.0625 to 1.875 Adj. Adapter and head drive
- Minimum Spindle Speed: 3:1 Reduction from Motor RPM
- Maximum Spindle Speed: 10,000 RPM
- Spindle Torque: 1300 LBS
- Full CNC rigid tapping, left or right hand, and drapping cycles (combination drilling and tapping)
- Programmed peck and multiple stage cycles
- Spindle nose options including ABS, HSK, ASA, and ER single angle collets
- Barrel foot mount, sub-base plate, and vertical column options